Description
Electric scooter inner tyre 10x2.50" 150g, 45 degrees, high quality and extra strong (with thick lug wall) 150g inner / air rubber. Suitable for installation in place of the 10x2.50" or 10x3.00 " inner ring / outer rubber. The valve of the inner rubber is at a 90 degree angle to the inner ring plane and at a 45 degree angle to the inner ring plane (see product picture). The 10x2.50" 125g, 45 degree inner tube is suitable for the Kugoo G-Booster, Inokim OX Hero / Super, Inokim OXO electric pushbikes. Also suitable for electric scooter Gpad Storm (Max), Techlife X7 / X7S, Kugoo Kirin M4 (also Pro), Inokim Quick 3+ (also Hero, Super). Compared to other inner tubes of the same size, this inner tube is more shock resistant due to the thickness of its material layer. However, it is not advisable to drive with too low tyre pressure, as over time, the tyre's inner tyre will also be worn down by the tyre pressure. If your electric scooter uses a 10x2.50" or 10x3.0" inner or outer tyre and the valve of the inner tyre is at the same angle, this inner tyre is suitable. The inner tube will also fit 255x80 and 80/65-6 outer tyres. The inner tube of the electric scooter has an auto-valve (AV), which can be inflated by most pumps. Because of the small size and air volume of its tyres, the electric scooter is at risk of inner tube rupture due to impact, we recommend checking the tyre pressure once every 2 weeks, or before each ride if the electric scooter is ridden less frequently. When inflating tyres, we strongly recommend the use of pressure gauge pumps to ensure the exact tyre pressure recommended by the electric scooter manufacturer. If your electric scooter is in need of repair or if a self-repairis too much for you, our specialist electric scooter workshop can help. We can also carry out tyre replacements on standby. You can read more about electric scooter tyre replacement in our blog post.
